getadapter - Obtain all network adapters's predictable name and some other information before provision or network configuration.
getadapter noderange [-f]
getadapter [-h|--help|-v|--version|-V]
Traditionally, network interfaces in Linux are enumerated as eth[0123...], but these names do not necessarily correspond to actual labels on the chassis. getadapter help customer to get predictable network device name and some other network adapter information before provision or network configuration.
Since getadpter uses genesis to collect network adapters information, the target node will be restarted.
getadapter For each node within the <noderange>, follows below scheme:
If the target node is scanned for the first time, getadapter will trigger genesis to collect information then save the information at the nicsadapter column of nics table. If the target node has ever been scanned, getadapter will use the information from nics table first. If user hopes to scan the adapter information for the node but these information already exist, -f option can be used to start rescan process.
getadapter tries to collect more information for the target network device, but doesn't guarantee collect same much information for every network device.
-h
Display usage message.
-v
Command Version.
-V
Display verbose message.
-f
Force to trigger new round scan. ignore the data collected before.
1. To collect node[1-3]'s network device information, enter:
getadapter node[1-2]
Output is similar to:
-->Starting scan for: node1,node2
The whole scan result:
--------------------------------------
[node1]: Adapter information exists, no need to scan.
--------------------------------------
[node2] scan successfully, below are the latest data
node2:[1]->eno1!mac=34:40:b5:be:6a:80|pci=/pci0000:00/0000:00:01.0/0000:0c:00.0|candidatename=eno1/enp12s0f0/enx3440b5be6a80
node2:[2]->enp0s29u1u1u5!mac=36:40:b5:bf:44:33|pci=/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.5/2-1.1.5:1.0|candidatename=enp0s29u1u1u5/enx3640b5bf4433
Every node gets a separate section to display its all network adapters information, every network adapter owns single line which start as node name and followed by index and other information.
2. Force to trigger new round scan
getadatper node -f